Plain annealed Copper conductor, PVC insulated.
Suitable for use in motor and switch panels and in distribution equipment, cables of 1.5 mm2 and above are for use in steel conduit and over insulating bodies over plaster in dry rooms; for continuous permissible service voltage of 690/1150 volts.

Plain annealed Copper conductor, PVC insulated, three, three and half or four cores laid up, bedded with PVC or tape, Flat wire armoring with helical steel taping and PVC sheathed.
Suitable for use in indoors, outdoors, underground and in water for continuous permissible service voltage of 720/1200 volts.

Specification: Plain annealed Copper conductor, PVC insulated. Twin or three core flat cables and PVC sheathed.
Suitable for use in or under plaster in dry rooms; for continuous permissible service voltage of 225/440 volts. Not to be used in 400 circuits.

Plain annealed Copper conductor, PVC insulated. Two, three or four cores laid up, filled with PVC and PVC sheathed alongwith a galvanised steel wire rope under the sheath.
Suitable for use as self supporting aerial cable for continuous permissible service voltage of 345/575 volts.

Plain annealed Copper conductor, PVC insulated, field limiting semi-conductive layers over each conductor and core insulation, concentric shields of copper over individual cores, three cores laid up, PVC bedded. Flat wire armouring with helical steel taping and PVC sheathed.
Suitable for use in indoors, outdoors, underground and in water for continuous permissible service voltage of 7000/12000 volts. Used for 11KV service connection and 11 KV distribution system.

Plain annealed Copper conductor, PVC insulated, three cores laid up, Copper shield over common covering of cores and PVC sheathed.
Suitable for use in indoors, outdoors, underground and in water for continuous permissible service voltage of 4200/7200 V. Used for 3.3 KV or 6.6 KV circuits.

Plain annealed flexible stranded copper conductor, PVC insulated, single, twin, three and four core laid up, filled with PVC or rubber where necessary and PVC sheathed, for permissible service voltage of 720/1200 volts.
For use in single/three phase connection, catenary power distribution cable with Gl. Catenary wire for cranes, hoists or any mobile overhead power driven equipment etc.

XLPE insulated and PVC sheathed cable are manufactured.
Suitable for use in indoors, outdoors, underground and in water and chemically active area & at high ambient temperature. Maximum operating temperature 900 degreeC.

Plain annealed Copper conductor, PVC insulated, two of three cores laid flat and PVC Sheathed.Suitable for use in fixed installations in dry or damp premises and for installation in walls or boards and in channel or embedded in plaster. not to be used in three phase 400 V circuits.

Plain annealed Copper conductor, PVC insulated, two core flat cable with earth continuity conductor and PVC sheathed.
Suitable for use in fixed isntallations in dry or damp premises and for installation in walls, on boards and in channels or embedded in plaster. Not to be used in three phase 400 V circuits.

Plain annealed Copper conductor, PVC insulated, single, two, three or four cores laid up filled with rubber and PVC Sheathed.
Suitable for use in fixed installations in dry or damp premises clipped direct to a surface or on a cable tray unenclosed and also for use in non-metallic conduit (PVC). Not to be used in 400V circuits.

Plain annealed copper wire PVC insulated flexible single & twin core with suitable lay.

Plain annealed copper wire (s) PVC insulated twisted with suitable lay and PVC sheathed, twin, three and four core Flexible cable (circular). Not to be use 400V cirtcuit.

Plain annealed Copper conductor, PVC insulated non-sheathed single core cable. suitable for use in steel conduit or trunking buched and enclosed and also for use clipped direct to a surface or on a cable tray bunched and unenclosed. Not to be used in three phase 400V circuits.